Output Select - Nikai NDVD1073VR Instruction Manual

Setting time and date
Setting time and date
Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
Call the player's "SETUP",
1
choose "VCR SETUP", then "CLOCK SET".
Move to the position you want to change and type in the
2
new values.
Wait a few seconds after typing a one-digit number.
Store with [OK] button and exit with [SETUP] button.
OSD ON & OFF
OSD (On Screen Display) ON & OFF
This player is set to "OSD (On Screen Display) ON" mode before shipping and you can change it
to OFF mode.
Call the player's "SETUP".
1
Choose "VCR SETUP".
2
And press the [OK] button.
Select "OSD ON/OFF".
3
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.
20
CLOCK SET
TIME - - : - -
DATE - - / - - /- - - -
0-9:SETUP (HOUR)
/ :CORRECT SETUP:END
CLOCK SET
TIME 06:05
DATE 06/08/2006(SUN)
0-9:SETUP (HOUR)
/ :CORRECT
OK:CONFIRM SETUP:END
SETUP
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM SETUP:END
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END

Output Select

To Select DVD
Press [DVD] button.
If DVD mode is correctly selected, DVD on the operation display
window is lit. Then, REMOTE button works as DVD function. Press the
[DVD] button, then the mode of DVD-Video Player becomes to the
OPERATION mode.
To Select VCR
Press [VCR] button.
If VCR mode is correctly selected, DVD on the operation display
window goes out. Then, REMOTE button works as VCR function. Press
the [VCR] button, then it becomes to the VCR OPERATION mode.
To Select Watch Modes or External Input
Press [INPUT] button.
When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it
is not operated in PLAY, REC and DVD mode.
21