Number Plate Lamp; Replacement Bulbs - Chevrolet 2012 Malibu Owner's Manual

9-36 Vehicle Care

Number Plate Lamp

To replace one of these bulbs:
Passenger Side Shown, Driver
Side Similar
1. Push the release tab (A) toward
the lamp assembly.
2. Pull the lamp assembly down to
remove.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
3. Turn the bulb socket (A)
anticlockwise to remove it from
the lamp assembly (C).
4. Pull the bulb (B) straight out of
the bulb socket.
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release
tab locks into place.

Replacement Bulbs

Exterior Lamp
Reversing Lamp
Deck Lid Tail lamp
Front Fog Lamp
Front Turn
Signal Light
Main-Beam
Headlamp (Base)
Number Plate Lamp
Dipped-Beam
Headlamp (Base)
Front Position Light
Rear Fog Lamp
Rear Indicator Lamp
Brake Lamp/
Tail lamp
For replacement bulbs not listed
here, contact your dealer.
Bulb
Number
W16W
W3W LL
H10
WY21W
H1
W5W LL
H7LL
W21/5WLL
P21W
WY21W
W21W