Empire Heating Systems DV-25T-1 Installation Instructions And Owner's Manual page 18

OPTIONAL BLOWER INSTALLATION INSTRUCTIONS (continued)
Cleaning
The blower wheel will collect lint and could require cleaning once
a year. If the air output decreases or the noise level increases,
it indicates a dirty wheel. Complete removal of the wheel and
scrubbing it with a brush under flowing water is recommended.
Oiling
The blower motor has an oil hole located on each end of the motor.
Use #20 motor oil only. It is best to oil the motor several times
during the heating season using 2 or 3 drops each time. If the motor
fails to start and hums, it could be a tight bearing due to lack of
oil. This may be corrected by pouring kerosene in the oil holes,
allowing to stand for a few hours and then oiling properly.
PARTS LIST
Index Part
No. No.
1 R-2090
2 632016
3 RH-036
4 642030
5 RH-710
6 9120106
7 872087
8 DV-806
9 DV-807
10 R-2091
11 8720161
12 R-2099
Page 18
Description
Motor
Motor Cushion
Motor Support
Blower Wheel
Blower Housing assembly
Fan Control Switch
Heyco Bushing
Switch Box
Switch Box Cover
Wire Assembly 19" (483mm)
Heyco Bushing
Cord Set 72" (1.83m)
13117-10-0709