Humminbird Ultima Operation Manual page 19

8. Setting Display Speed;
Factory setting: Maximum
The Ultima display is "updated" (advances across the
screen) as you move through the water. The speed at which
the display is updated depends on the Display Speed setting.
To adjust it, select DISPLAY SPEED, and press the UP arrow
for a faster setting or the DOWN arrow for a slower setting.
In general, higher Display Speed settings provide
faster updates, while slower Display Speeds provide more
detailed information.
9. Using TripLog
Factory Setting: Off
The Ultima TripLog provides a full screen of
information on current conditions for elapsed time
distance and speed. To display it, select TRIPLOG and
press ON-OFF.
Further information is given on the next page.
All log information is continuously updated as
long the Ultima remains powered on. if you want to reset
Average Speed, Elapsed Time, and Elapsed Distance,
press the STOP button.
Pressing ON-OFF exits the Trip Log and returns
you to normal operation.
Note: TripLog requires the proper input from the temp
and speed accessories on the transom of the boat.