Setting The Clock - Sharp R-960N Operation Manual

There are two setting modes: 12 hour clock and 24 hour clock.
Step 1 Step 2
x1
Example:
To set the 24 hour clock to 23:35.
1. Choose the 24 hour clock
by pressing the CLOCK
key twice.
x2
4. Input the minutes (35).
Press the TIME keys.
x3
NOTES:
1. Press the STOP / CLEAR key if you make a
mistake during programming.
2. If the oven is in cooking or timer process and you
wish to know the time of day, press the CLOCK
key. As long as your finger is pressing the key, the
time of day will be displayed.
3. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door. The display will show
". 0". If this occurs during cooking, the programme
will be erased. The time of day will also be erased.
R-960N_01-47.indd 10 R-960N_01-47.indd 10

SETTING THE CLOCK

1. To set the 12 hour clock, press the CLOCK key once as in Step 1.
2. To set the 24 hour clock, press the CLOCK key twice as in Step 2 .
x2
2. Input the hours. Press the TIME
keys until the correct hour is
displayed (23).
x2
5. Press the CLOCK key to start
the clock.
x5
3. C h a n g e f r o m h o u r s t o
x3
x1
4. When you want to reset the time of day, follow the
above example again.
5. If you do not want to set the clock, press the
STOP / CLEAR key once. . 0 will appear on
the display. When the operation of the oven is
finished, . 0 will reappear on the display instead
of the time of day.
6. If you set the clock, energy save mode does not
work.
10
minutes by pressing the
CLOCK key once.
x1
Check the display.
5/14/08 10:51:56 AM 5/14/08 10:51:56 AM