Asf Assembly Removal - Epson Stylus Photo 720 Service Manual

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3

4.2.5.5 ASF Assembly Removal

1. Remove the Housing. (See "Housing Removal" on page 68)
2. Release the hook and remove the Spur Gear 34 from the Roller Shaft of the ASF
Assembly. The fixing hook position of Spur Gear 34 differs between Stylus Photo 720
and Stylus Photo EX3 as shown in the figure below.
Stylus Photo 720
Stylus Photo EX3
Spur Gear 34 Securing Hook
Figure 4-20. Spur Gear 34
3. Remove the cable from the Cable Hook of the ASF Assembly.
(The Cable Hook is located at the right side seen from the back side of the printer.)
4. Remove 1 screw (with washer) securing the ASF Assembly to the Printer Mechanism
and ASF securing screw.
Disassembly and Assembly
Spur Gear 34 Securing Hook
Spur Gear 34
Cable Hook
Securing Screw with Washer
Figure 4-21. ASF Securing Screw Removal
5. Shift the ASF Assembly to the right (seen from the back side of the printer) and while
lifting the Sub Paper Support, remove the ASF Assembly to the back side of the
printer. (Stylus Photo EX3: 2 Sub Paper Supports are installed.)
Shift the ASF to the right
Figure 4-22. ASF Assembly Removal
Disassembly
Revision A
ASF Securing Screw
Sub Paper Support
80