Specifications - Humminbird 500 series Operation Manual

Specifications

Depth Capability .............................................................. 800 ft (250 m)
Power Output .................. 250 Watts (RMS), 2000 Watts (Peak to Peak)
Operating Frequency ............ 200 kHz Single Beam (515, 525 and 535)
Area of Coverage................ 60° @ -10 dB in 83 kHz (565 and 575 only)
Target Separation ................................................ 2
Power Requirement .............................................................. 10-20 VDC
LCD Matrix .............................................................. 240 V x 160 H (515)
Transducer...................................... XHS 9 20 T (515, 525, 535 and 565)
Transducer Cable Length ...................................................... 20 ft (6 m)
Current Draw .................................................................................. 175 mA (515)
NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth
performance may vary due to transducer installation, water type, thermal layers, bottom
composition and slope.
Product specifications and features are subject to change without notice.
200 kHz and 83 kHz Dual Beam™ (565 only)
200 kHz/83 kHz/455 kHz QuadraBeam PLUS™ (575 only)
90°Total Coverage @ -10 dB in 455 kHz (575 only)
20° @ -10 dB in 200 kHz
640 V x 320 H (565 and 575)
XT 6 TB 90 T (575 only)
61
Inches (63.5 mm)
240 V x 240 H (525)
320 V x 320 H (535)
200 mA (525 and 535)
225 mA (565 and 575)