Updating Device Drivers; Controls And Leds - IBM xSeries 382 User Manual

v Resource CD
v ServeRAID support

Updating device drivers

Device drivers for IBM devices and the instructions to install them are on the
Resource CD.
Before you can recover or install device drivers, your operating system must be
installed on your computer. Make sure that you have the documentation and
software media for the device. The latest device drivers are also available at
http://www.ibm.com/pc/support/.

Controls and LEDs

The following illustrations show the controls and LEDs on the front of the server.
The ac-power and power-supply LEDs are behind the bezel. The DVD/CD-ROM
drive, front panel video and USB connectors, and all operator information panel
controls and LEDs are behind the bezel door.
AC-R LED
Hot-swap hard disk drive activity LED
Hot-swap hard disk drive status LED
DVD/CD-RW drive activity LED
CD-eject button
Hard disk drive activity/failure LED
6
IBM eServer xSeries 382 Type 8834: User's Guide
connection is automatically switched to the redundant Ethernet connection. If the
appropriate device drivers are installed, this switching occurs without data loss
and without user intervention.
The Resource CD that comes with your server provides programs to help you set
up and maintain your server.
Your server supports IBM ServeRAID adapters to create an external redundant
array of independent disks (RAID) configuration.
Hard disk drive
activity LEDs
AC2 LED
Hard disk drive
AC1 LED
status LEDs
On some server models, each hot-swap drive has a hard disk drive activity
LED. When this green LED is flashing, it indicates that the drive is in use.
On some server models, each hot-swap drive has a hard disk drive status
LED. When this amber LED is lit, it indicates that the drive has failed.
When this LED is lit, it indicates that the DVD/CD-RW drive is in use.
Press this button to release a CD or DVD from the DVD/CD-RW drive.
When this amber LED is lit continuously (not flashing), it indicates a hard
disk drive failure. Detailed troubleshooting information is in the Hardware
Maintenance Manual and Troubleshooting Guide on the IBM xSeries
Documentation CD.
Operator information panel
CD-ROM drive
activity LED
CD-eject button
USB 3 connector
USB 4 connector
Front panel
video connector
PS1 LED
PS2 LED
PS-share LED
(some models)