Epson TM-L90 User Manual page 12

English
Width note:
When you want to set the roll paper width from 61 mm to 70 mm, break
off by hand the two tabs of the spacer shown in the illustration below.
(You can still also use widths from 38 mm to 60 mm with the spacer with
the tabs broken off.)
tabs
4. Insert the screw included with the spacer into the hole indicated
below and tighten it. (Even if you can see two holes, this is the only
one to put the screw in.)
hole for screw
10 TM-L90 User's Manual