Setting The Time And Calendar; Displaying The Calendar/Time - Alpine Marine iDA-X100M Owner's Manual

Setting the Time and Calendar

1
Press and hold FUNC./SETUP for at least 2 seconds
to activate the SETUP selection mode.
2
Rotate the Double Action encoder to select
"General", and then press
Bluetooth General
Audio
3
Rotate the Double Action encoder to select
"Clock Adjust", and then press
The calendar setting mode is activated.
When the year is set, proceed step 5.
4
Rotate the Double Action encoder to select year,
month, day, hour or minutes to be set.
5
Press /ENTER.
The year setting mode is activated, and the year blinks.
(When "year" is set)
6
Rotate the Double Action encoder to set year, and
then press /ENTER.
The setting for year is complete. (When "year" is set)
7
Repeat steps 4 to 6 above to set month, day, hour
and minutes.
8
Press and hold for at least 2 seconds to return to
normal mode.
• Only when Auto Clock is set to OFF, can the setting be made. Refer
to "Setting the Time to automatically Adjust" (page 10).
• Pressing during the procedure will return to the previous mode.
/ENTER.
Display iPod Tuner
/ENTER.

Displaying the Calendar/Time

Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return
to normal mode.
• Selecting any tuner or iPod function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the RDS mode is set, radio text can be displayed. Refer to
"Displaying Radio Text" (page 11).
• If an iPod is connected via USB, the album cover screen can be
displayed. Refer to "Changing the Display" (page 14).
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
7
-EN