LG C1100 Service Manual page 100

1. Connect as Fig 6-2 (RS232 serial cable is connected between COM port of PC and MON
port of TEST JIG, in general)
2. Set the Power Supply 4.0V
3. Set the 3 rd , 4 th of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1 st ON state
D. Procedure
1. Connect as Fig 6-2 (RS232 serial cable is connected between COM port of PC and MON
port of TEST JIG, in general)
2. Power ON PC then enter into Windows 98 (Remark : Windows 2000 system could be
feasible)
3. Run AUTOCAL.exe, the AUTOCAL application window will be appeared.
6. DOWNLOAD AND CALIBRATION
- 99 -