Battery Protection Mode; Charging The Battery; Performing A Factory Reset - Bose SoundLink Air Owner's Manual

Whippet_OG.book Page 20 Wednesday, May 16, 2012 3:51 PM
C M
ARE AND AINTENANCE

Battery protection mode

If the battery is not being charged and the SoundLink Air system is unused for
more than 14 days, it enters battery protection mode to preserve battery power.
To reactivate your SoundLink Air system, connect the power supply to the
system and charge the battery.

Charging the battery

To charge the battery, plug the power supply into a live AC outlet and plug the
cord into the DC POWER connector on the back panel of the SoundLink Air
system. Recommended charging time is 10 hours. The battery indicator will
turn off when the battery is fully charged.
Amber: .......Battery charging
Off: .............Charging cycle done
Packing the power supply for traveling
Wind the cord into the groove around the top of the power supply.
Slide the small round ball along the cord as needed to press it into
the channel.

Performing a factory reset

A factory reset clears all source, volume, and network settings from the
SoundLink Air system and returns it to its original factory settings.
To reset your system, press and hold the Reset button on the
bottom panel for 10 seconds.
When reset is complete the Wi-Fi indicator will blink amber.
To reconnect with your Wi-Fi network, run the Wi-Fi setup
application again.
20 – English