Advertisement
COMMANDS
COMMANDS TO SET THE VCR
R/P SPEED SET (7EH)
•
To set the recording/playback speed
directly.
After sending the R/P SPEED SET
(7EH) command, send 3 bytes of
numeric data (30H to 39H), then the
GB
data input command (40H)
Example: For 960H
RXD
7E
TXD
0A
COUNT RESET (E2H)
•
To reset the counter (0000).
COUNT MEMORY (E3H)
•
To turn ON/OFF the counter
memory.
ON-SCREEN COMMANDS
MENU (74H)
•
To switch the menu display.
If sent during stop mode, the menu
display is switched.
SHIFT → (63H)
•
When a menu is displayed, it will
move the cursor towards the right.
•
When the date/time indication is
displayed, it will move it towards the
right.
7
39
36
30
0A
0A
0A
SHIFT ↓ (64H)
•
When a menu is displayed, it will
move the cursor down.
•
When the date/time indication is
displayed, it will move it down.
SET +, R/P j (UP) (65H)
•
When a menu is displayed, it will
modify (increase) the date/time
setting or the numerical value.
•
To select the tape speed.
40
SET –, R/P l (DOWN) (66H)
•
0A
When a menu is displayed, it will
modify (decrease) the date/time
setting or the numerical value.
•
To select the tape speed.
MENU RESET (E1H)
•
For each displayed menu, it will
reset the menu settings to the
default values.
Advertisement
