Vax 30000 User Manual page 9

Operation
Getting Ready to Wash
Unclip Container Release Clips (A)
on both sides of machine.
Replace clean water tank (A) inside
dirty water tank (B) taking care to
ensure that the space to allow the
dirty water back into the tank is
lined up with the solution port (C).
vax.com.au
Lift o motor container and remove
lter assembly. Remove the plug
from the solution intake port and
replace the solution connector tube.
The machine can be used for
washing by placing the clean water
tank (A) back inside the dirty water
tank (B).
Replace motor container (A)
ensuring that the solution pump
hose (B) is aligned with the hole
in the clean water tank (C)
so that it goes inside when the
motor container is clipped back
into position.
Remove clean water tank (A) from
inside the dirty water tank and
ll with warm (max 40°C) water
to point indicated on the tank.
Add 1 capful of Vax Carpet Cleaning
solution per litre of water (unless
otherwise stated on the bottle).
WARNING: Machine must
not be plugged in during
this stage.
8