Dry Vacuuming - Vax 30000 User Manual

Operation

Dry Vacuuming

IMPORTANT: Always remove the power plug from the wall outlet before assembling, servicing
or removing accessories.
IMPORTANT: Only the red power button should be "ON" when the machine is in dry vacuuming mode.
The green pump button should be "OFF".
Unclip Container Release
Clips (A) on both sides
of machine.
Lift out and remove the
clean water solution tank.
Store safely away.
vax.com.au
Remove the motor top
from the unit, turn on its
side and remove the oat
housing in an anti-clockwise
direction to unscrew.
Fit the pleated pre-motor
lter by pushing and lightly
twisting the lter on the
motor top.
Remove the solution
connector tube by turning
anti-clockwise by 90
degrees. Store in a safe
place.
Fit the dust bag by aligning
the front of the dust bag
with the inlet slots, and
position the dust bag to ll
the inside of the base.
Fit the plug to the solution
intake port.
Replace the motor top,
ensuring that the dust bag
is not trapped. Ensure the
motor top is secured to the
base with the two clips.
4