BusinessPhone – Dialog 4425 IP Vision
Installation
Configuration
When the Dialog 4425 IP Vision has been connected to a power
supply and to the IP network (LAN), the display will show:
Settings
CallList
User administrator mode to change IP settings
The (x) represents a timer counting down in seconds. This display
is for administrator mode only. Do not press a key during this time,
and
is selected automatically.
No change
Note: If you press a key accidentally, please contact your
system administrator.
Now the display shows:
Settings
CallList
Connecting to DHCP server
The IP telephone is connecting to the DHCP server and gets its IP
address from the network.
Note: This menu is not displayed if you are using fixed IP
addresses.
After the IP address has been retrieved, the telephone checks
automatically if new software is available. See section
updates" on page 134.
Contacts
(No change)
Contacts
Installation
(x)
"Software
133