Auto Installation Setup; Source Menu - Cello C32100DVB User Manual

Auto installation setup

Power On / Off the TV
To turn on the TV
Touch the power button on the TV or press the
indicator will light green.
To turn off the TV
Touch the power button on the TV or press the
indicator will light red.
When you initially turn on the TV you will see the first time installation menu as below:
Ensure that the aerial is plugged in to the TV,
Make sure your Remote is in TV mode (by
pressing button), switch on the TV by
TV
pressing . You will see the first time
installation menu.
Press the button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.
By pressing the Quick Start button the first
time installation can be recalled at any time.

Source Menu

You can select the input source menu by pressing the Source button on the remote control or
the TV / AV button on the TV.
Source
OK
button on the remote control, the standby
button on the remote control, the standby
17
DTV
ATV
SCART
YPBPR
PC
HDMI1
HDMI2
HDMI3
HDMI4
AV
USB