Belkin UNIVERSAL PORTABLE KEYBOARD CASE Instructions

UNIVERSAL PORTABLE
KEYBOARD CASE
Delivering the best typing experience. Enjoy!
Pour une frappe optimale. Profitez-en!
Brindándole la mejor experiencia al teclear ¡Disfrute!
Product Overview
Vue d'ensemble du produit
Descripción general del producto
1
4
2
3
1. Bluetooth ® keyboard 3. Charging port (micro-USB)
Clavier Bluetooth Port de charge (micro-USB)
®
Teclado Bluetooth ® Puerto de carga (micro-USB
2. Status LED 4. Bluetooth pair button
Voyant d'état Bouton de couplage Bluetooth
Luz LED de estado Botón de enlace Bluetooth
INSTRUCTIONS
To start, charge your keyboard by connecting the USB cable to an
appropriate USB power source (e.g. laptop, USB wall charger (not
included), etc.) and the micro-USB to your keyboard.
When the battery is fully charged, the Status LED turns OFF.
Then pair it with your iPad or iOS device. The Status LED light will flash
while the keyboard is not paired.
To initiate pairing between the keyboard and iPad or iOS device, ensure
they are in close proximity:
For iPad or iOS:
Go to the Home screen on your iPad or iOS device and tap on
1
"Settings > General > Bluetooth."
2 Turn Bluetooth to "On."
3 Turn on the keyboard and press and hold the "Pair" key.
4 The Status LED will begin flashing on the keyboard and the
keyboard will show up under "Devices" on the tablet. Select "Belkin
Bluetooth Keyboard."
5 A code will appear on the iPad or iOS device screen. Use the keyboard
to enter this code followed by the "Enter" key.
If, after 60 seconds, pairing fails, you will have to repeat the steps
above. You can view the status from the screen of the iPad or
iOS device.
For Android:
1 Go to the settings screen on your Android device and enter the settings
menu on "Settings menu > Bluetooth."
2 Turn Bluetooth to "On." Note: If your Android device doesn't search
for devices automatically, you will have to enable it.
3 Turn on the keyboard and press and hold the "Pair" key. The Status
LED will flash on the keyboard and the keyboard will show up under
"Devices" on the tablet. Select "Belkin Bluetooth Keyboard."
4
A code will appear on the Android device screen. Use the keyboard to
enter this code followed by the "Enter" key.
If, after 60 seconds, pairing fails, you will have to repeat the steps
above. You can view the status from the screen of the Android device.
Note: Setup instructions may differ from one Android device to another;
follow your device's Bluetooth pairing instructions from the manual.
After creating a paired link, you do not need to repeat the pairing
process; the keyboard automatically links to the tablet when both
devices are switched on. Pairing must be performed every time
you want to use the keyboard with a different iPad, iOS device, or
Android device.
The keyboard is designed to prolong battery life and will enter into
battery-saving mode under prolonged inactivity. To wake the keyboard,
press any button. The Status LED will flash while the connection
is being reestablished, and will be solid for two seconds when the
connection is successfully established. The Status LED then turns off
during ongoing operation. Note that if the LED starts blinking while the
keyboard is in use, it is indicating a low battery status and it's time to
charge the battery.
Please note that the mute function works with iOS only. To mute your
iOS device hold the function key and press "0." To unmute your device,
repeat the muting process.
LES INSTRUCTIONS
Pour commencer, chargez votre clavier en branchant le câble USB sur
une source de courant USB appropriée (p. ex. un ordinateur portable, un
chargeur mural, etc.) et le micro-USB sur le clavier.
Lorsque la pile est complètement chargée, le voyant d'état s'ÉTEINT.
Couplez-le ensuite avec votre iPad ou votre appareil iOS. Le voyant d'état
clignotera tant que le clavier ne sera pas couplé.
Pour amorcer le couplage du clavier avec la tablette ou le téléphone
intelligent, assurez-vous que les deux appareils sont situés à proximité
l'un de l'autre :