Table of Contents
Advertisement
Chapter 4 :
Note
When you are calling in
handsfree mode and you wish
to change the volume, press
up or down key
/
3
12
repeatedly.
Prolonged usage of the hands-
free function will increase
battery consumption.
BoB
handset operation
TM
Receiving a Call
During an internal or external incoming call, the
handset will start to ring. You can temporarily disable
the handset ringing by pressing the option key
'Silent'
.
15
•
All subscribed handsets will ring when you receive
a call.
•
The Call symbol
blinks on the display.
•
The telephone number of the caller only appears
on the display if you have Caller ID enabled with
iiNet. The name of the caller also appears on the
display if:
•
the number is programmed into the phone book
with name
•
the network sends the name together with the
telephone number
•
Press the off hook key
external call. OR Lift the handset off its base unit
(if the Auto answer option is active, See "Auto
answer" below).
•
During the conversation the
the display and the call timer starts to run.
•
After finishing your call, press the on hook key
to hang up or put the handset back on
5
the base unit.
Redial list options
When scrolling through the redial list (see "Redial
one of the last 10 numbers dialled") you have the
following options:
When the desired number is shown on the display
press 'Option'
and select with the up and down
2
keys
/
the following options:
3
12
'Delete Call': to delete an entry in the redial list.
•
Press
to confirm.
2
•
'Save number': to store the number into the
phone book memory. Press
Enter a name (See "10.1 Adding a number and a
name to the phone book" ) and press 'Save'
Edit the number and press 'Save'
•
'Delete all calls': to delete all entries in the redial
list. Press
to confirm.
2
Activate / deactivate handsfree function
•
This function allows you to communicate without
having to pick up the handset. When you are
talking, press the handsfree key
activate the handsfree function.
•
Press the
button again to deactivate the
11
handsfree function.
'Out of range' warning
If the handset is out of range of the base unit, a
warning signal will sound.
•
'SEARCHING' appears on the display and the
symbol
•
Move closer to the base unit.
•
As soon as you are back within range of the base
unit, a signal sounds and the symbol
blinking.
Setting the speaker volume
Use the up and down keys
conversation to set the volume of the speaker. You
can select from 5 levels. The telephone is set to
level '3' by default:
to accept the
11
symbol appear on
The handsfree volume can be set the same
way as above.
Call Duration Indicator on
the Display
During an external call, the call duration is shown on
the display:
E.g. "01:10:40" for 1 hour , 10 minute and 40 seconds.
The call duration remains visible on the display for
seconds after each call.
Turning off the microphone (mute)
To turn off the microphone during a call press the
menu key
to confirm.
2
the caller being able to hear you. To activate the
microphone again, press the option key 'Off'
.
2
again.
2
Pause key
If you dial a telephone number and you would like to
add a pause to this number, press the Pause key P
at the desired place in the number.
When you dial or redial this number, the pause (3
seconds) is automatically included.
to
11
will flash on the display.
stops
/
during the
3
12
'Volume 1'
'Volume '
'Volume 3'
'Volume 4'
'Volume 5'
. Now you can speak freely without
15
.
15
5
Page 6
Advertisement
Table of Contents
