Table of Contents
Advertisement
●
To connect DVI (Simple display of HDMI signal from digital camera)
An HDMI signal from a digital camera can be simply displayed by means of connecting this product and the
digital camera using a DVI-HDMI converter cable.
Attention
• For displaying the PC signal, "Single Link" or "Dual Link" should be set.
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "Signal Selection" from "Optional Settings", and press
4. Select "DVI" with
5. Select "Signal Format" with
6. Select "HD Video" with
7. Press
8. Select "Finish" with
9. Press
.
The "Optional Settings" menu is closed.
●
To connect DisplayPort / Mini DisplayPort
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "Signal Selection" from "Optional Settings", and press
4. Select "DisplayPort" with
5. Select "Signal Bandwidth" with
Use
or
to select or just confirm the signal bandwidth setting for the frequency that corresponds to your graphics
board.
Setting
Normal
Wide
6. Press
.
7. Press
8. Select "Finish" with
9. Press
.
The "Optional Settings" menu is closed.
down, press
for at least two seconds to turn on the monitor.
or , and press
or , and press
or , and press
twice.
or .
down, press
for at least two seconds to turn on the monitor.
or , and press
or , and press
Horizontal scan frequency
26to89
26to89
twice.
or .
.
.
.
.
.
(kHz)
.
.
Vertical scan frequency (Hz)
59to61
23.75to63
Chapter3SettingMonitor
27
Advertisement
Table of Contents
