Advertisement
Function
Implement Attachments
Implement Load Capacity
Inside Clearance
Draw Pin Bracket Attachments
Draw Pin Mounting
Draw Pin Adjustments
Overall Dimensions
Weight
You will need the manual for the safety warnings and precautions, assembly instructions, operating
and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place
for future reference.
WARNING: When using tool, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
3.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
4.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the
work of a larger industrial tool. There are certain applications for which this tool was designed.
It will do the job better and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
5.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and non-skid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
6.
Use eye and ear protection and protective clothing. Always wear ANSI approved impact
safety goggles. Wear an ANSI approved dust mask or respirator when working around metal,
wood, and chemical dusts and mists. Wearing of gloves and protective clothing is
recommended.
7.
Do not overreach. Keep proper footing and balance at all times.
8.
Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories.
SKU 93691
Specifications
Item
For quick and easy attachment and release of
3-point implements to most category 1 tractors
Meets American Society of Agricultural
Engineers (ASAE) specifications; Can mount
non-ASAE attachments
Same as 45 HP tractor specifications
26-1/2"
1/2" x 2-3/4" Hex Bolts
18" high
18", 19", 20", and 21" on center
30"W x 24" H
60 lbs.
Save This Manual
Safety Warnings and Precautions
For technical questions, please call 1-800-444-3353
Description
REV 02/07
Page 2
Advertisement
