HTC Mogul User Manual page 131

3. Create a Bluetooth partnership between the two devices. For information about creating a
partnership, see "Bluetooth partnerships." After a partnership has been created successfully, your
computer is ready to receive Bluetooth beams.
4. On your device tap and hold an item to beam. The item can be an appointment in your calendar, a
task, a contact card, or a file.
5. To beam a contact, tap Menu > Send Contact > Beam. To beam other types of information, tap Menu >
Beam [type of item].
6. Tap the device name to which you want to send the beam.
7. If you beamed an Outlook item and it is not automatically added to Outlook, select File > Import and
Export in Outlook to import it.
To beam information to a Bluetooth-enabled device such as another smart device, follow steps 3 to 6 in the
above procedure.
If the device you want to beam to does not appear in the box, make sure that it is turned on and
Note:
visible.
To receive a Bluetooth beam:
Your device will not detect and notify you of incoming Bluetooth beams unless you set it up to do this.
1. Tap Start > Settings > Connections tab > Beam.
2. Select the Receive all incoming beams check box.
3. Make sure your device is turned on, visible, and within Bluetooth range of the device that is beaming
the information.
4. When prompted to receive an incoming beam, tap Yes to receive the beamed information.
Selecting the Receive all incoming beams check box also allows the device to detect and receive
Tip:
infrared beams.
Section 11: Getting Connected 133