Using Speed Dialing - Sanyo S1 User Manual

Using Speed Dialing

With this feature, you can dial your favorite entries using one keypress for
locations 2–9. (See "Assigning Speed Dial Numbers" on page 90.)
To use speed dial :
From standby mode, press and hold the appropriate key for
approximately two seconds.The display confirms that the number
has been dialed when it shows "Connecting...".
Speed dialing may not be available when you are roaming; when you are
Note
roaming off the home network, you must always dial using 11 digits
(1 + area code + number).
32 Section 2A: Phone Basics