How To Identify Parts Of Vacuum Cleaner; Maintenance Schedule - Eureka AS1040 series Owner's Manual

How to identify parts of vacuum cleaner

Air path
selector knob
Power cord
Cord reel
Maintenance Schedule is also located on back side of dust cup.
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked
Filter
DCF21
Screen
Exhaust filter
EF6
( HEPA filter
on some models)
Brush roll
2 Eureka Customer Service HELPLINE 1-800-282-2886
SPECIAL FEATURES
Available on some models
Handle
Turbo nozzle
(on some models)
Dust cup release
WAND
2 2
Filter and screen
(located inside dust cup)
Wand 2
Dust cup
Exhaust/HEPA
filter compartment
(located behind dust cup)
Height adjustment knob
Brush roll cover

Maintenance schedule

Turbo
nozzle
Turbo cover
Crevice tool
Dusting brush
Cord rewind switch
Power switch
Handle release
Press lever to release bottom lid.
Debris will empty.
FILTER DCF21 – Replace or clean regularly to maintain suction
Empty cup. Pull back
latch to lift off lid.
Remove screen. Rinse
screen and dust cup.
Dry thoroughly.
EXHAUST FILTER EF6 – Check filter regularly. Replace every
6-12 months or when performance loss is noticeably declining
U belt
Remove dust cup. Press down tab and
U BELT – Replace worn, cut or out of shape belt
Hose
DUST CUP – Empty after each use
Close bottom lid
until it clicks.
For quick clean, Grasp filter and twist to remove
tap filter. from lid. Shake dust from filter.
Align tab with slot to Reinstall filter. Align lid
reinstall screen. at front; press down until
Lift out filter and replace. Reinstall
remove filter cover. cover and snap into place.
BRUSH ROLL – Clean monthly
www.eureka.com
Cord clip
Carry handle
Wand
Lower hose retainer
Base hose
I
for On/Off.
lid snaps into place.