Table of Contents
Advertisement
Connect to wireless networks
After Wi-Fi is turned on in Comm Manager, your device scans for available
wireless networks in your area.
To connect to a wireless network
1.
The network names of the detected
wireless networks are displayed on
a pop-up message window. Tap the
desired wireless network, then tap OK.
2.
On the next pop-up message window,
do one of the following:
•
Tap The Internet if the wireless
network connects your device to
the Internet.
•
Tap Work if the wireless network
connects your device to a private
network.
3.
If the wireless network is secured by
a network key, enter the key, then tap
Connect.
Next time you use your device to detect wireless networks, you will not see
the pop-up message windows again, and you will not be prompted to enter
the network key of the previously accessed wireless network (unless you
perform a hard reset which will erase custom settings on your device).
Note
Wi-Fi networks are self-discoverable, which means no additional steps are
required for your device to connect to a Wi-Fi network. It may be necessary
to provide a username and password for certain closed wireless networks.
To check wireless network status
You can check the current wireless connection status from any of the
following screens of your device:
Getting Connected 151
Advertisement
Table of Contents
