Screen Menu - Hitachi CP-X3030WN Operating Manual

SCREEN menu

SCREEN menu
From the SCREEN menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the
item. Then perform it according to the following table.
Item
LANGUAGE
MENU POSITION
BLANK
AUTO BLANK
(continued on next page)
50
Using the ▲/▼/◄/► buttons switches the OSD (On Screen
Display) language.
ENGLISH FRANÇAIS
(shown in the LANGUAGE dialog)
Press the ENTER or INPUT button to save the language setting.
Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press the MENU button on the remote control
or keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature (
It is displayed by pressing the BLANK button on the remote control.
MyScreen ORIGINAL
MyScreen : Screen can be registered by the MyScreen item (
ORIGINAL : Screen preset as the standard screen.
BLUE, WHITE, BLACK : Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the AUTO BLANK screen after several minutes.
Using the ▲/▼ buttons switches the mode for the AUTO BLANK
screen.
BLUE WHITE
• To avoid remaining as an afterimage, displayed image will change
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
Description
DEUTSCH
BLUE WHITE
BLACK
ESPAÑOL
31).
BLACK
51).