Denon AVR-X1100W Owner's Manual page 156

Contents Connections
3
Connect the Sound calibration microphone to the
SETUP MIC jack of this unit.
When the Sound calibration microphone is
connected, the following screen is displayed.
.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and mic stand.
Back
.
Front panel Display
Playback
4
5
Next
Rear panel 156
Settings Tips
Select "Next", then press ENTER.
Audyssey Setup
Set the following items if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start
Back
.
Select "Start", then press ENTER.
Audyssey Setup can also make the following settings.
®
Amp Assign
0
The signals output from the SURROUND BACK speaker
terminals can be switched in accordance with your speaker
environment. ("Amp Assign" (v p. 163))
Channel Select
0
If channels that are not to be used are set in advance,
measurement for the set channels is skipped, and measuring
time can be reduced. You can also change the number of
surround back speakers and subwoofer.
Remote Index
Appendix