Denon AVR-X1100W Owner's Manual page 148

Contents Connections
o Now Playing
Sets the display time for the playback display when the input source is
"Online Music", "iPod/USB", "Bluetooth" or "Tuner".
Always On
(Default) :
Auto Off:
Front panel Display
Playback
Show display continuously.
Show display for 30 seconds after
operation.
Rear panel
Settings
TV Format
Set the video signal format to be output for the TV you are using.
o Format
PAL
(Default):
NTSC:
"Format" can also be set by the following procedure. However, the menu screen
is not displayed. Following the display content to make the setting.
1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3
seconds.
"V.Format:<PAL>" appears on the display.
2. Use the main unit's TUNER PRESET CH + or TUNER PRESET CH - and set
the video signal format.
3. Press the main unit's STATUS to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture
will not be displayed properly.
148 Remote
Tips Appendix
Select PAL output.
Select NTSC output.
Index