Power Wheels Ford F-150 Owner's Manual With Assembly Instructions page 12

12
Bottom View
• Turn the vehicle so that the front end is toward you.
• Lift the front end of the vehicle.
• Fit the steering linkage assembly to the front end of
the vehicle.
• Insert two #12 x 1 1 / " screws into the holes in the steering
4
linkage. Tighten the screws.
• Pull the steering linkage to be sure it is secure. If it is not
secure, tighten the screws a few more turns.
13
7 / " Washer
16
Front Axle
Bottom View
• Slide a / " washer onto a front axle.
7
16
• Slide a bushing, ring side first, onto a front axle.
Assembly
Steering Linkage
Assembly
Bushing
(Ring Side First)
Bushing
Ring Side First
12
14
Front Axle
• Fit a wheel, rib side in, onto the front axle.
• Slide a hubcap, peg side in, onto the front axle.
15
.437"
• Fit a .437 cap nut on the end of the front axle.
• Fit the assembly tool over the cap nut. Tap the end of the
assembly tool with a hammer to secure the cap nut on the
end of the front axle. Pull the wheel to be sure it is secure.
Hubcap
(Peg Side In)
Wheel
(Rib Side In)
Front Axle
Assembly
.437 Cap Nut
Tool