HTC EVO 4G PC36100 User Manual page 105

Make sure that the headset is discoverable, so that your device can find the headset. Refer to the
3.
instructions that came with the headset to find out how to set it in discoverable mode.
Tap . Your device will start to scan for Bluetooth devices within range.
4. Scan for devices
When you see the name of your headset displayed in the Bluetooth devices section, tap the name. 
5.
Your device then automatically tries to pair with the headset.
If automatic pairing fails, enter the passcode supplied with your headset.
6.
The pairing and connection status is displayed below the hands-free headset or car kit name in the
Bluetooth devices section. When the Bluetooth headset or car kit is connected to your device, the Bluetooth
connected icon is displayed in the status bar. Depending on the type of headset or car kit you have
connected, you can then start using the headset or car kit to listen to music or make and receive phone
calls.
Reconnecting a Headset or Car Kit
When you have paired a headset with your device, you should be able to reconnect it automatically by
turning on Bluetooth on your device, and then turning on the headset. However, sometimes you will need to
reconnect manually, for example if you have been using your headset with another Bluetooth device.
1. Press , and then tap
>
2. If Bluetooth is not switched on, tap the
3. Make sure that the headset is discoverable.
Tap the headset's name in the Bluetooth devices section.
4.
If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit documentation to find
5.
the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in "Disconnecting or Unpairing
From a Bluetooth Device" in this chapter, and then follow the instructions in "Connecting a Bluetooth
Headset or Car Kit."
Disconnecting or Unpairing From a Bluetooth Device
To disconnect a Bluetooth device:
Press , and then tap
1.
>
In the Bluetooth devices section, press and hold the device to disconnect.
2.
3. Tap Disconnect .
To unpair from a Bluetooth device:
You can make your device forget its pairing connection with another Bluetooth device. To connect to the
other device again, you may need to enter or confirm a passcode again.
Press , and then tap
1.
>
In the Bluetooth devices section, press and hold the device to unpair.
2.
Tap
3. Unpair.
Settings > Wireless & networks > Bluetooth settings
Bluetooth check box to switch it on.
Settings > Wireless & networks > Bluetooth settings
Settings > Wireless & networks > Bluetooth settings
.
.
.
2I. Bluetooth 95