Defining Rule Schedules - D-Link DSR-250N User Manual

Unified Services Router
may use the IP address if a static address is assigned to the WAN port, or if your
WAN address is dynamic a DDNS (Dynamic DNS) name can be used.
Outbound (LAN/DMZ to WAN) rules restrict access to traffic leaving your network,
selectively allowing only specific local users to access specific outside resources. The
default outbound rule is to allow access from the secure zone (LAN) to either the
public DMZ or insecure WAN. You can change this default behavior in the
Settings > Default Outbound Policy
allow always, you can to block hosts on the LAN from accessing internet services by
creating an outbound firewall rule for each service.
Fig ure 38: L ist of Ava ilab le Firewall R ules

5.2 Defining Rule Schedules

Tools > Schedules
Firewall rules can be enabled or disabled automatically if they are associated with a
configured schedule. The schedule configuration page allows you to define days of
the week and the time of day for a new schedule, and then th is schedule can be
selected in the firewall rule configuration page.

All schedules will follow the time in the routers configured time zone. Refer to the
section on choosing your Time Zone and configuring NTP servers for more
information.
page. When the default outbound policy is
66
User Manual
Firewall