HTC EMC220 User Manual page 88

88 Getting Connected
3. Select the Authentication type and Data encryption then click
Next. For WPA authentication or TKP, AES, or WEP data encryption,
enter the needed information in the remaining fi elds.
4. Select Use IEEE 802.1x network access control to use Extensible
Authentication Protocol (EAP). Select the EAP type depending on the
type of authentication. Click Finish.
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of
Comm Manager helps increase security on your phone, and ensures that
nobody is able to access your network without your permission.
On the WLAN Settings screen, select LEAP.
1.
2. Click Menu > New.
Note
Enter the SSID (Service Set Identifi er).
3.
You can obtain this information from your wireless service provider.
4.
Enter the user name, password, and domain.
5. Select an Authentication Type.
By default, the Authentication Type for your phone is Open
System authentication.
Note
By default, the LEAP screen displays data that you entered previously.
However, you can modify or delete the data as required by clicking Menu >
Modify or Menu > Delete on the LEAP screen.
For LEAP to work correctly, the receiving phone (your phone) must be set
with the same SSID, user name, and password as the access point.