Enlargement Of The Image And Video Movement - Taxan KG-PS100S User Manual

General Operation

Enlargement of the Image and Video Movement

This function digitally enlarges the personal computer image and video
image.
(1) Press the ZOOM button to enlarge the image.
The zoom display appears when the ZOOM button is pressed.
Each press of the button enlarges the image and each press of the
button makes the image smaller (returning it to 1:1).
Zoom 0
(No enlargement)
(2) Pressing the SELECT (
the time of the zoom operation will cause the display position to
move.
(There will not be any movement when zoom is at 0.)
Zoom 21
(Approximately 2 times enlargement)
(3) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
After magnifying the image, be sure to use the ZOOM button to bring the gauge
value back to "0".
The image can also be moved in the following circumstances.
• When "Aspect Ratio" is set to "Real" by the signal of the personal computer, and the input resolution is
higher than the display resolution of the projector.
• When "Aspect Ratio" is set to "Zoom" by the video signal.
Note:
* Zoom and image movement functions are cancelled when the input is switched.
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected
so that they are not conspicuous.
* Movement of the screen will not be possible when the menu screen is being displayed.
Zoom
21
(Approximately 2 times enlargement)
) buttons on the remote control at
Zoom 21
(Movement)
E-30
POWER/
STANDBY
MENU
COMPUTER ENTER
(2)
VIDEO CANCEL QUICK
(3)
QUICK
FREEZE MUTE ECO COLOR ADJ
ASPECT
(1)
VOL KSTN ZOOM AUTO