Starting Up - Cingular 8500 User Manual

22 Getting Started

1.3 Starting Up

Turn your device on and off
To turn on your device, press the Power button. When you turn on
your device for the first time, you are asked to complete a calibration
process. For more information, see "Calibrate the device".
To turn off your device, press and hold the Power button for a few
seconds. A message will then be displayed, prompting you whether or
not to turn off the device completely.
Note
Calibrate the device
Calibrating the device screen involves tapping the center of a cross
with the stylus as the cross moves around the screen. This process
ensures that when you tap the screen with your stylus, the tapped item
is activated.
If your device does not accurately respond to screen taps, follow these
steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, then follow the on-screen
instructions to complete the calibration.
Quickly pressing the power button turns off your device temporarily and
switches it to sleep mode. You will still be able to receive messages and
calls while your device is in sleep mode.
Calibrating the device