Table of Contents
Advertisement
Chapter 3
System Configuration
3.1 Power On and Access Configuration Menu
After power on, the PWR/LNK LED on the top-right of LCD monitor turn red to indicate it
have received power. The LED will then turn green if the Ethernet network connection is
established. The conferencing phone should take about 50 seconds to make power on
self-test and system start up. In this period, the screen is still blank. Please do not press
any button on this period.
After the booting process is completed, the following page is shown on the LCD monitor.
Press [Menu] button, a System Configuration page is shown. Please use [p], [u], [q]
and [t] to move the highlight to the function you need to configure and [Enter] to enter
the function menu.
13
Advertisement
Table of Contents
