ProCurve Wireless Access Point 10ag Installation And Configuration Manual page 78

Managing the Access Point
Rebooting the Access Point
5-10
Refer to the procedure below for instructions on how to reboot the access
point from the Web interface.
Figure 5-5. Reboot Page
To reboot the access point:
1. On the menu, click Reboot Access Point.
2. In Reboot access point, click Yes.
3. Click Apply. A confirmation message appears.
4. Click OK. The following message appears:
Access Point is rebooting......
PLEASE WAIT until re-directed to Information page.
When the access point has rebooted, the logon dialog box appears.
5. Enter your user name and password to log back on to the Web interface.