Table of Contents
Advertisement
Setting Up the Access Point
Configuring Advanced Settings
N o t e
4-26
Figure 4-15. Advanced Settings Page
To configure the advanced settings:
1.
On the menu, click Advanced Settings.
2.
In Radio, select the radio for which you want to configure the advanced
settings. Available options are 802.11a and 802.11b/g.
3.
In Status, click Enable if you want to turn on the radio interface that you
selected in the previous step. Default is Disable.
If you have SSIDs that are configured to use the selected radio, you need to
enable the radio interface for the SSIDs to work.
4.
In WMM Support, click Enable if you want the access point to prioritize
certain types of traffic above other traffic. When enabled, WiFi Multimedia
(WMM) provides basic Quality of Service (QoS) to wireless network. You
should enable this option if your network requires prioritization for voice
or video traffic (for example, if network users use Voice over IP applica-
tions).
5.
Configure the following advanced settings for the SSID that you selected:
•
RTS Threshold: Sets the packet size threshold at which a Request to
Send (RTS) signal must be sent to a receiving device prior to the
sending device starting communication. The access point sends RTS
frames to a receiving device to negotiate the sending of a data frame.
Hide quick links:
Advertisement
Table of Contents
