Snmp Properties; Snmp Properties Dialog - HP SAN Switch User Manual

SNMP properties

Use the SNMP Properties dialog shown in
making changes, click the OK button to put the new values into effect. To open the SNMP Properties
dialog, choose one of the following:
• Select Switch > SNMP Properties.
• Right-click a switch graphic in the faceplate display, and select SNMP Properties from the popup menu.
Making any changes. Click OK to put the new values into effect.
NOTE:
Since read community, trap community, and write community settings are like passwords and are
write-only fields, the current settings are displayed as asterisks.
Figure 34

SNMP Properties dialog

SNMP properties are divided into the following components:
• SNMP
configuration, page 77
• SNMP trap
76
configuration, page 77
Figure 34 to change SNMP configuration parameters. After