HP SAN Switch User Manual page 62

Table 8
Switch data window entries (Continued)
Entry
User Login
User Name
Login Level
Super User
UserAuthentication Enabled
Firmware
Firmware Version
Inactive Firmware Version
Pending Firmware Version
PROM/Flasher Version
Services
NTP Client Enabled
NTP Server Address
FDMI Enable
FDMI HBA Entry Limit
Embedded GUI Enabled
Inactivity Timeout
GUI Mgmt Enabled
Telnet Enabled
SSH Enabled
SSL Enabled
CIM Enabled
FTP Enabled
Management Server Enabled
62
Description
Account name
Authority level
Super user privileges enabled/disabled
Enforcement of account names and authority (always True)
Active firmware version
Not applicable.
Firmware version that will be activated at the next reset
PROM firmware version
NTP client status. Controls time synchronization with an NTP server.
The IP address of the centralized NTP server. Ethernet connection to
NTP server is required.
Fabric Device Management Interface status. If enabled, device
information can be obtained, managed, and saved through the
fabric using Name Service Management Server functions. McDATA
Web Server will report all FDMI information reported by the entry
switch, if FDMI is enabled on the entry switch. See
detailed device information" on page 35 for information about
displaying FDMI information.
Maximum number of Host Bus Adapters (HBA) that can be registered
with a switch.
McDATA Web Server web applet status. Enables or disables the web
applet on the switch.
Number of minutes the switch waits to terminating an idle command
line interface session. Zero (0) disables the time out threshold.
Web applet status.
Telnet client status
Secure Shell status. If enabled, an encrypted data path is provided
for command line interface sessions.
Secure Sockets Layer status. If enabled, encryption for switch
management web applet and CIM sessions is provided.
Common Information Model status. The CIM agent is based on the
SNIA Storage Management Initiative Specification (SMI-S), which is
the standard for SAN management in a heterogeneous environment.
FTP status
Management server status.
"Displaying