HP Q.11. (2510-24) Access Security Manual page 270

Configuring and Monitoring Port Security
Configuring Protected Ports
1 2 3
Room 2
Figure 9-18. Example With Ports 1-8 Protected and Ports 9 and 10 Unprotected
9-28
ProCurve(config)# show protected-ports
Protected-ports
Unprotected-ports: 1-3,6-26
Figure 9-16. Example Showing Protected Ports and Unprotected Ports
If you display the running config file (show running-config) you will see the
ports that have been selected as protected ports.
ProCurve(config)# show running-config
Running configuration:
; J9019B Configuration Editor; Created on release #Q.11.XX
hostname "ProCurve Switch 2510-24"
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-26
ip address dhcp-bootp
exit
protected-ports 4-5
Figure 9-17. Example of Running Config File Showing Protected Ports
In the example in Figure 9-18, ports 1 through 8 are protected. Port 2 connects
to Room 2 and Port 4 connects to Room 4. Ports 9 and 10 are unprotected and
provide access to the internet. Ports 2 and 4 are able to access the internet,
but are not able to communicate with each other or any of the other rooms
that are connected to protected ports.
Protected
4 5 6 7
Room 4
: 4-5
Protected ports
Unprotected
8 9 10
Switch/Router or
Internet
Ports 1-8 are protected
and cannot
communicate with each
other. They can only
communicate with the
unprotected ports 9 and
10.