Input Voltage
Input Frequency
Output Power
Water Capacity
PROBLEM
Unit fails to heat
Steam Cleaner heats up
but there is no steam out-
put.
Removing Mineral Buildup Procedure
As with any steam appliance, mineral buildup may occur in the boiler. If
you are not using distilled or de-mineralized water we suggest you follow
this procedure monthly.
1. Perform steps 1-5 of the Cleaning and Storage Procedure.
2. Prepare a mixture of 50% vinegar and 50% water in the Measuring
Cup. Pour the mixture into the Boiler.
3. Let stand for 45 minutes. Note: Do not plug the unit in while it is
filled with the vinegar-water mixture.
4. Drain the vinegar-water mixture from the Boiler.
5. Flush the Water Reservoir with fresh water and drain until no vinegar
smell remains. You may need to repeat this step several times.
Specifications
Troubleshooting Guide
Steamer not plugged in
Household Circuit
Breaker Tripped or Fuse
Blown
Unit needs water.
Steam outlet blocked.
120 VAC
60 Hz
900 W
6 oz
CAUSE
180 ml
SOLUTION
Plug into electrical outlet.
Reset the circuit breaker
or replace the fuse. If you
need assistance contact a
qualified electrician.
Follow the Water Filling
Instructions.
Discontinue using the
unit. Place a Service Call.
11