Service Calls - McCulloch MC1220 Instruction Manual

Operating the Handheld Steam Cleaner
1.
Plug the power cord into a convenient receptacle. The Steam Ready Light
will immediately illuminate. (Note: The Steam Ready Light is illuminated
when the Boiler is heating. The unit has no power switch.)
Warning: This appliance has a grounded (3 prong) plug. Use only in prop-
erly installed 3 pronged outlets. Do not attempt to defeat this safety feature
2. The Steam Ready Light should extinguish in 3-4 minutes, indicating that the
cleaner is ready to steam.
3. To begin cleaning press the Steam Button on the Handle.
Warning: Be sure the Nozzle or other attachment is pointed is a safe direc-
tion before pressing the Steam Button.
4. During use the Steam Ready Light may come back on. This is normal. If you
notice a drop in pressure release the Steam Button until the Steam Ready
Light goes out again.
5. When finished using the steam cleaner unplug the unit.
Caution: Do not let the steam cleaner operate with a dry Boiler or damage to
the unit could occur.
Cleaning and Storage Procedure
1. Unplug the unit.
2. Wait for the unit to cool completely (at least 30 minutes).
3. Remove the attachments.
4. Carry the unit to a convenient sink or tub.
5. Drain any leftover water from the unit.
6. Flush the Water Reservoir with fresh water and drain. This helps to remove
any mineral residue that may have built up. Repeat this step several times.
7. (Optional) Reattach the attachments.
8. Store the unit.
If you have any problems or questions and the Troubleshooting Guide does not
help, please call our customer support at 1-800-711-6617, send an email to
customerservice@topinnovations.com, or go to our website,
www.topinnovations.com. Please DO NOT return a unit without calling and
receiving a Return Authorization Number .
10

Service Calls

.