SOYO SY-7IWB User Manual page 38

Hardware Installation
2. Infrared (IR1)
Plug the 5-pin infrared device cable to the IR1 header. This will enable the
infrared transfer function. This Motherboard meets both the ASKIR and
HPSIR specifications.
Please install according to the following pin assignment:
Serial Infrared (IR1) Connector
3. CD Line-in (J10,J11)
This Motherboard provides two CD-Line in connectors. Please connect the
4-pin audio cable from your CD-ROM drive to either J10 or J11. (It fits in
only one, depending on the cable that came with your CD-ROM drive)
Please install according to the following pin assignment:
IR1 Pin Assignment
1 2 3 4 5
VCC
IRRX
J10,J11(CD Line-in)
Pin Assigment
J11
1
Left
GND
2
3 GND
Right
4
34
IRTX
GND
J10
1
Left
2
GND
Right
3
4
GND
SY-7IWB