HP J3178A Hardware Installation Manual page 54

Configuring the Switch From the Console
Configurable Features
Figure 4-12. Example of the STP Configuration Screen
5.
6.
7.
8.
9.
10. Return to the Main Menu to access other functions.
4-18
If the remaining STP parameter settings are adequate for your network,
go to step 8.
Use [Tab] or the arrow keys to select the next parameter you want to
change, then type in the new value. (If you need information on STP
parameters, press [Enter] to select the Actions line, then press H to get
help.)
Repeat step 6 for each additional parameter you want to change.
When you are finished editing parameters, press [Enter] to return to the
Actions line.
Press [S] to save the currently displayed STP parameter settings and return
to the Configuration menu. The Spanning Tree configuration is automat-
ically activated when it is saved.