Call Waiting And Camp-On Ring Tone Over Handset/Headset Option; Initialise Or Adjust Lcd Contrast - Toshiba DP5000-Series User Manual

Call Waiting and Camp-on Ring Tone Over Handset/
Headset Option
Call Waiting and Camp-on tones are sent to a busy telephone's speaker to indicate that
a call is waiting. Call Waiting and Camp-on Tones can be sent, as an option, to the
telephone handset or headset, in addition to the speaker. Follow these steps to turn
handset/headset Call Waiting and Camp-on tone On/Off for a DP5000-series
telephone. The default is Off.
3
1. Press +
0
2. Press .
3. Press Feature Button 4 (FB4) to toggle On/Off.
FB4, LED On: Call Waiting tone
FB4, LED Off: No Call Waiting tone
4. Press
5. Go off-hook, then on-hook to exit the program mode.

Initialise or Adjust LCD Contrast

To initialise LCD Contrast for the LCD Telephones
3
1. Press +
Mode
2. Press
3. Press
4. Press
5. Go off-hook, then on-hook to exit the program mode.
To adjust LCD Contrast for the LCD Telephones
Press and hold down the
▼
repeatedly.
Each time you press
a total of 13 different contrast levels available.
Strata CIX DP5000-series Telephone User Guide
6 9
+ + (simultaneously).
to set the option.
6 9
+ + (simultaneously).
soft key.
button so that the
. This sets the LCD lightness/darkness contrast to the default setting.
Vol ▲
or
LED is On.
button while you press and release
Vol ▼
, the contrast increases or decreases. There are
05/09
Administrator Programming
Telephone Programming Mode
Vol ▲
or
Vol
105