D-Link DCS-2332L User Manual page 51

Section 4: Configuration
CoS Settings:
Enabling the Class of Service setting implements
a best-effort policy without making any bandwidth
reservations.
QoS Settings:
Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the Network Camera is connected to a
router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
IPv6:
Enable the IPv6 setting to use the IPv6 protocol. Enabling
the option allows you to manually set up the address,
specify an optional IP address, specify an optional router
and an optional primary DNS.
Multicast:
The DCS-2332L allows you to multicast each of the
available streams via group address and specify the TTL
value for each stream. Enter the port and TTL settings
you wish to use if you do not want to use the defaults.
D-Link DCS-2332L User Manual 51