Table of Contents
Advertisement
Security Codes and Authority Levels (cont'd)
PART. 1 A0* WHSE
USER 003 AUTH=3G.
To Change a User's Code
1. Enter Master or Manager code and press the
to be changed.
2. Enter the new code for that user.
ADD NEW USER?
0 = NO , 1 = YES
USER 002 CHANGED
SUCCESSFULLY
– 20 –
When all partitions have been displayed, the
keypad scrolls through the partition(s) that access
has been assigned, and displays the user number,
authority level and global arm option for each. The
"G" after the authority level indicates that the
global arm feature is active for this user in the
displayed partition. The "*" indicates the partition
from which this user can be changed or deleted. The
"." at the end of the second line indicates that this
user sends open/close reports. Open/close reporting
is automatically active for any users added by you,
if you have open/close reporting active.
The system will recognize that the user number is
already in use and will prompt whether or not this
is a new user.
Enter 0 to change the existing
user's code to the code entered in step 3.
The system confirms that the change is allowed
based on authorization level, and if so, puts the
new code into effect.
Note that if changing one's own code, the
system prompts for the new code to be re-entered.
This prevents accidentally changing one's own
code.
CODE
8
key + user number
Hide quick links:
Advertisement
Table of Contents
