Table of Contents
Advertisement
To Add a User or
Important: Temporary users of the system (e.g., babysitters, cleaning staff, etc.) should not be
Change a User's
shown how to use any system function they do not need to know, such as bypassing protection
Code
zones for example.
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
(Master Code)
CODE
1.
+
8
2.
(User Number)
3.
(User's Code)
To Delete a User
(Master Code)
CODE
+
8
2.
(User Number)
To Change Your Master Code
Original Master Code
CODE
+
8
SECURITY CODES
Enter your 4-digit master code then press CODE key.
Enter 2-digit user number.
Enter the 2-digit User Number (03–16) for the user you are adding or changing.
Enter 4-digit user's code.
Enter the new 4-digit security code for that user.
Enter master code then press CODE key.
Enter 2-digit user number to be deleted.
Enter the 2-digit User Number (03–16) for the user whose code you are deleting.
Wait (about 3 seconds) until the keypad beeps once before pressing any other
key. The code is automatically deleted.
Master's User No.
New Master Code
+
0
2
+
– 28 –
New Master Code
Note that the new Master
Code must be entered twice.
+
Advertisement
Table of Contents
