Belkin F5U261qea1 User Manual page 12

Installation
Note B—VERY IMPORTANT:
with most USB 2.0 PCI upgrade cards, and are pre-installed along with the
PCI card drivers. If you purchased an upgrade card prior to the release of Hi-
Speed USB 2.0 hub support, please check with your PCI card vendor for an
updated USB 2.0 driver. The Belkin USB 2.0 driver supports all competitive
PCI cards based on the NEC host controller, with the exception of those
released by Adaptec. The most recent Belkin driver is available at belkin.com.
EN
7. Plug the USB A connector of a USB device, or an additional hub, into any
of the downstream ports of the Drive Bay Hub. (See Fig. 5.)
Fig. 5
Note C: When plugging a USB device into the Hub for the first time, it may be
necessary to reinstall the USB drivers for that device. Likewise, if you move
the device to another port on the Hub, it may be necessary to reinstall the
drivers.
6 6
Hi-Speed USB 2.0 hub drivers are included