Epson LQ-570e Service Manual page 98

EPSON LQ-570e/LQ-580
8. The process selection menu appears. Move the cursor using "
"In line" and press "Enter" key.
9. The carriage width select menu appears. Move the cursor using "
"(1) 80 column" and press "Enter" key.
10. The main menu appears. Move the cursor using "
paper" from the list and press "Enter" key. The test pattern printing starts.
Adjustment
↑ ↓
" or " " key to select
↑ ↓
" or " " key to select
↑ ↓
" or " " key to select "(2) FF
Adjustment and Resetting the Printer
11. After the test pattern is printed out, turn off the printer once to install the factory setting
into the EEPROM.
12. Press "ESC" key several times to quit the adjusting program.When the menu changed
to "OK", input "System" to finish the program (from dos prompt back to Windows).
n As this adjustment program is just same as the check program in
C A U T I O N
the factory and includes many other check items which are not
needed for service, you should not perform any items which are
not described in this manual. Otherwise, the printer functions
are not guaranteed.
n The factory setting value is not installed into the EEPROM
without this FF paper printing.
Revision C
98